McHenry, Illinois Pentair Water Softening Company and Supplier

Pentair Water Softener Troubleshooting. Pentair Pelican Water Softener System at 1.2 Measure water hardness before/after appliance: • Open a cold water faucet before/after the appliance and let the water run for a few minutes Possible Causes: Old Age: Water softeners usually last about 8-10 years

If you can't avoid a short connection, move the equipment to another location Page 24: Troubleshooting TROUBLESHOOTING Problem Cause Correction 1

Orland Park, IL Pentair Water Softening & Conditioning Company

Water level should be between 4"-14" If there is no water in tank, contact technical support at 877-842-1635. Salt bridges form when the brine tank is stored in a high-humidity area, or the salt levels are too high for the tank. After 2-3 minutes, open a cold treated water faucet nearby the appliance and let the water run for a few minutes until all air is purged from the installation and the resin bed is rinsed (it is normal for the rinse water to show some discoloration!); close the tap

Water Softener Troubleshooting & Diagnostic Procedures & FAQs1. To fix this issue, you can perform a manual regeneration cycle on your system Check the appliance and all hydraulic connections for

Pentair Water Softener Watersofteneri. If you can't avoid a short connection, move the equipment to another location Once your water softener is up and running, you need to make sure it stays that way